Helpline 7357715333 [9am to 6pm] Send Enquiry

CONSTRUCTION FIBER

The key actions of STRONGPLAST are as follows:

Provides inherence micro-reinforcement against shrinkage and intrinsic cracking.
Reduces rebound losses in plasters to 60-70%.
Reduces bleeding and dust formation in concrete.
Improves impact resistance 3-4 times.
Improves abrasion resistance by 30-40%.
Gives residual strength to concrete thereby helping reduce sudden failures. This is a desirable characteristic of concrete in areas prone to earthquakes.
Reduces permeability and thus protects interior paint in plasters.
Reduction in permeability also helps protect reinforcement steel in concrete applications.
Makes the concrete more durable.
Makes hardened concrete more tough.
Improves speed and finishing of plasters.

Areas of application:
Internal and external plasters.
Industrial flooring.
Warehouse flooring.
Concrete Roads.
RCC Beams, Columns & Slabs.
Bridge decks.
Driveways.
Overlays / toppings.
Concrete tanks.
Precast elements.
Shotcrete / guniting.
Basement waterproofing.
All types of plasters, precast elements and concretes, where toughness is required along with elimination of shrinkage cracks, reduction in permeability (improved water resistance) and various other parameters mentioned above.

Properties:
Length : Multiples of 3/6 mm.
Construction : Straight.
Melting Point : 165 Deg C.
Specific Gravity : 0.92 gm/cc.
Absorption : Nil.
Acid Resistance : High.
Alkali Resistance : Completely resistant.
Salt Resistance : High.
Thermal Conductivity : Low.
Electrical Conductivity : Low.
Tenacity : 6.5 GPD.
Elongation : 19%.

Important information for our buyers:
Dosage for plasters : 100-125 g / 50 kg cement bag as recommended by designer.
Dosage for concrete : Minimum 0.9 kg / m3 of concrete i.e. @125 g /50 kg bag of cement.
Water Cement Ratio : STRONGPLAST is a physical micro-reinforcement and does not react chemically hence additional water is not required.
Mixing process : Mix directly in the concrete mixer @ 125 g /50 kg bag of cement or 0.9 kg/m3.
For plastering applications dry mix with sand cement mortar before adding water.
Note : Fibres should not be used for replacement of structural or load bearing reinforcement.
⇒ Terms and Condition ⇐ 1. Rates are 18% GST Paid.
2. All rates are Ex. Godown at MIA, Madri, Udaipur.
RECRON 3s

Packing MRP
(₹)
Selling Price
(₹)
Shipping Charges
(₹)
125 Grams
(Per Pack)
47
(Per Pack)
400
(Pack of 10)
50
125 Grams
(Per Pack)
47
(Per Pack)
1000
(Pack of 25)
50
125 Grams
(Per Pack)
47
(Per Pack)
2000
(Pack of 50)
Free
125 Grams
(Per Pack)
47
(Per Pack)
3900
(Pack of 100)
Free


Super Acrylic Emulsion


Recron 3s are Engineered Micro-fibres with a unique “Triangular” Cross-section, used for Secondary Reinforcement of Concrete. The usage complements Structural Steel in enhancing Concrete’s resistance to Shrinkage Cracking and improves mechanical properties such as Flexural / Split Tensile and Transverse Strengths of Concrete along with the desired improvement in Abrasion and Impact Strengths.


Features and Benefits

► Improves Resistance to Plastic & Drying Shrinkage Cracking
► Inhibits propagation of Micro-cracks and provides stability to concrete
► Improves Flexural toughness/increases Split tensile strength
► Enhances Abrasion Resistance and increases energy absorption of concrete thereby improving Impact Resistance
► Aids in making Concrete more homogenous
► Reduces Permeability in concrete
► Improves Durability and enhances Longevity of Concrete/Structure

STRONGPLAST PP FIBER

Packing MRP
(₹)
Shipping Charges
(₹)
125 Grams
(Per Pack)
380
(Pack of 10)
50
125 Grams
(Per Pack)
950
(Pack of 25)
50
125 Grams
(Per Pack)
1900
(Pack of 50)
Free
125 Grams
(Per Pack)
3700
(Pack of 100)
Free


Multifilament Straight Fibres (STRONGPLAST) is chemically surface treated 100% Virgin high tenacity polypropylene straight fibre based cement, mortar (plaster) and concrete additive and is available in graded lengths. It provides 3-D micro-reinforcement to plasters as well as concretes. These are available in multiples of 3 mm, 5 mm and 6 mm. This product is used @ 0.9 kg /m3 of plaster or concrete (minimum). STRONGPLAST complies with ASTM C 1116 and ACI committee report 544-1R.


Color: Pure white
Size/Length: Available from 3 to 24 mm in multiples of 3 mm
Usage : Plasters, RCC, Precast articles, RMC, Ready mix plaster, mortars, etc.
Usage (size wise): 3 mm length fibre is recommended for putty usage, 6 mm length fibre is recommended for plaster usage and 12+ mm length fibre is recommended for usage in RCC etc.


GUJCON CRF & PRF

Virgin Nylon-6 Fibres for Secondary Reinforcement in Concrete & Plaster
A new revolution in Construction & Road Infrastructure

GUJCON CRF & PRF Polyamide-6 (Nylon-6) Fibres
► A breakthrough in secondary reinforcement
► Development based on extensive Research and Application trials
► Unique and state-of-the-art next generation products for rendering long lasting solutions to some of the teething problems of construction and infrastructure industries
► Superior to other secondary reinforcement Fibre products
► Reliable secondary reinforcement material

Grade of GUJCON Nylon-6 Fibres
► GUJCON CRF for Concrete Applications
► GUJCON PRF for Plaster Applications

GUJCON-CRF


* GUJCON – CRF is specially engineered 18 mm length Nylon-6 Fibre for providing secondary reinforcement in RCC & PCC.

GUJCON – CRF Properties Value
Material 100% Virgin Nylon-6 Fibre
Fibre Cross Section Trilobal
Fibre Length 18 mm
Sp. Gravity 1.14
Color Brilliantly White
Melting Point 220 °C
Chemical Resistance Very good against Alkalis, Hydrocarbons


► RCC & PCC - Slabs, Beams, Columns & Lintels
► Pavement, Flooring, Roads, Bridges, Airport Runways
► Pre Cast Concrete Structures
► Water Retaining Structures


► Prevents cracks occurrence at point of inception
► Increases compression, flexural and impact strength
► Reduces water permeability and makes surface less porous
► Improves surface finish
► Increases wear/abrasion/impact/shock load resistance
► Increases uniformity and workability of concrete mix
► Enhances life of structures


GUJCON-PRF


* GUJCON –PRF is specially engineered 06 mm length Nylon-6 Fibre for providing secondary reinforcement in plaster.

GUJCON – PRF Properties Value
Material 100% Virgin Nylon-6 Fibre
Fibre Cross Section Trilobal
Fibre Length 6 mm
Sp. Gravity 1.14
Color Brilliantly White
Melting Point 220 °C
Chemical Resistance Very good against Alkalis, Hydrocarbons


► Plaster
► Shotcrete
► Guniting


► Reduces water absorption and penetration depth
► Prevents cracks occurrence at point of inception
► Improves shatter resistance of wall
► Makes surface less porous and improves surface finish
► Reduces rebound loss
► Checks dampness and saves on repairing cost
► Increases workability, uniformity and strength of mortar mix
► Improves work pace by binding ingredients in thicker coat

Catalogue




webmaster@apnagharbanao.in
Go To Top