Helpline 7357716333 [9am to 6pm] Send Enquiry



SILICO READY MIX PLASTER is a polymer modified premixed cement based plaster. It is convenient, easy to use, strong and binds better to its substrate. It provides an even surface on which tiling can be done faster & efficiently. READY MIX PLASTER is specially formulated using graded sand to impart compactness to the plaster. It also contains special polymers which reduces re-bonding losses, thereby increasing the productivity of the labour and has water-retaining component which reduces the curing requirement of the plaster, when compared to conventional method.

Price : ₹275 /- per bag of 40 Kgs
Price : ₹325 /- per bag of 50 Kgs

Terms & Conditions 1. Rates are inclusive of 28% GST
2. All rates are Ex our Godown at MIA, Madri, Udaipur.

Technical Specifications
High Bond Strength
Consistent Product Quality
Faster Construction

Keshava Brochure
Silico Plast Brochure
Ready Mix Plaster DataSheet

Additional Information
Payment Mode : Advance RTGS, Cheque, Against Delivery
Material Dispatched from : Udaipur, Ahmedabad, Mehsana


BLOCKS JOINTING MORTARS a versatile thin jointing material for laying AAC blocks, Fly Ash Bricks, Hollow and Solid Concrete Blocks etc. The product is specially designed to provide higher bonding as a result of higher tensile adhesion strength.
SILICO FIX BLOCKS JOINTING MORTARS is pre-mixed, easy to apply high quality mortar comprising of cement, graded sand and admixtures. This mortar replaces conventional jointing mortar of 12-18 mm thickness with highly versatile 3 mm hickness.

Price : ₹600 /- per bag of 40 Kgs

Terms & Conditions 1. Rates are inclusive of 18% GST
2. Above rates are FOR at your site at Udaipur for truck load or Ex Udaipur Godown for smaller quantaties.

Technical Specifications
Appearance : Grey Powder
Water Required : 25 to 30%
Pot Life : 1.5 - 2 hrs at 27 degree centigrade
Tensile Adhesive Strength : 0.34 MPa (as per ASTM-C1660)
Shelf life: 12 months
Coverage : One bag of 40 Kgs should ideally be sufficient for jointing 1 cubic meter of AAC Blocks. For a wall of 4 inch thickness, one bag should cover approximate 100-115 sq ft.

Features and Benefits
» Thin jointing material with very high adhesion strength
» Pre-mixed and ready-to-use. Only water is to be mixed at site
» Economical. Eliminates lengthy and cumbersome processes of site mixing, thus transport and storage of all individual materials is avoided
» Ease of mix and much faster application
» Thin layer application results in structure being compact
» No water curing is required after application
» Minimizes the undulation of the surface
» Being a thin layer, chances of water percolation is negligible
» Being premixed, it saves considerable time and labour
» Eco-friendly product
» Raw materials are processed, reducing the chances of efflorescence
» Laying and jointing of fly ash bricks, cement blocks, hollow blocks, AAC blocks etc.
» Jointing of pre-stressed concrete slabs, panels.
» Parapet walls
» Jointing of cement window and door frames.
» Garden and boundary walls.
Surface Preparation:
» The base surface should be properly cured prior to application of Block Joining Mortar.
» The surface must be cleaned thoroughly, with no loose particles or dust.
» The surface must be structurally sound, clean and free from dirt, oil, grease, efflorescence and any other contaminant which could impair the natural bond.
» Surface defects such as cracks, holes or voids should be repaired prior to application.
» It is very important that Block Joining Mortar is mixed with water properly and thoroughly before use. It is advisable to use a mechanical stirrer for uniform and thorough mixing to save time, labour and for maximum workability.
» Take a clean vessel/bucket, add water to it and put required quantity of Block Joining Mortar in it.
» Mixing Ratio - Clean potable water (approximately 25%-30%) of the weight of the powder is required to be mixed depending upon the thickness of the product to be applied. Water is to be incrementally added in stages to get a smooth, uniform and workable mix. Allow ample of time for initial mixing.
» Ensure that no powder is left unmixed at the bottom of the vessel. Block Joining Mortar is now ready for application.
Application Procedure:
» Layout the wall in which BLOCKS is to be used and mark openings like door, windows, any architectural appurtenances etc.
» Put a thin layer of Block Joining Mortar in the thickness of 3 mm on the clean and leveled surface using proper trowel on which the block work is to be carried out.
» Place the block on the laid Block Joining Mortar in proper line and level.
» After placing the first block apply the Block Joining Mortar of same thickness on both the sides of the block continuously keeping a check on the line and level.
» Clean the excess material, if any immediately. Continue the procedure for the entire block work.
» Under normal conditions the coverage of Block Joining Mortar is approx. 180-200 sq. ft with average thickness of 3mm for a bag of 40 kgs. The coverage area however will depend upon the quality of the substrate and thickness of the material used.
» For best results, proper tools for mixing and application is advised which will result in higher coverage, savings in time and manpower.
Precautions during usage:
» Though it contains non-toxic materials but still care should be taken to avoid dust inhalation while mixing and handling. In case of contact with eyes or mouth, wash with plenty of clean water.
» Keep it in a safe dry place which is out of reach of children.
» Persons who are allergic to cement should take proper precautions before use.
» Block Joining Mortar is available in 40kgs PP laminated bags.


Additional Information
Payment Mode : Advance RTGS, Cheque, Against Delivery
Material Dispatched from : Udaipur, Ahmedabad, Mehsana
Go To Top