ZYCOBOND MAX Water Proofing 1Ltr
Translucent Liquid Dispersion
4 years if stored as recommended.
Horizontal Concrete Surfaces
Approx. 24-40m² (260-430 ft²) 1 litre of ZycoBond Max diluted with 1 Ltr of water to overcoat the Zycosil Max treated surface
Solubility (in Water)
APPLICATION METHOD :-
Clean the surface with wire brush, scrubber or air blower to remove hidden dirt, loose particles, laitance & dust. De-grease the surface by using suitable solvents, if needed.
ZycoBond Max solution must be applied wet-on-wet by spray / flooding / roller following treatment of surface with ZycoSil Max solution
Prepare solution of ZycoSil Max with water in ratio of 1 : 45 then add 2 liters of ZycoBond Max to prepared solution.
For achieving best performance, brush or roll above solution from bottom to top.
Full saturation for the vertical surface is achieved when, solution starts dripping upon brushing or rolling.
APPLICATION AREAS :-
Horizontal Waterproofing: To be used in a ratio 1:1 (with water) wet-on-wet after ZycoSil Max treatment
Vertical Waterproofing: To be used as part of Zycosil Max solution in ratio of 1:45:2 of ZycoSil Max : Water : ZycoBond Max
FEATURES & BENEFITS :-
♦ UV stable & Economical.
♦ Reduces considerably permeability of water.
♦ Bonds strongly with ZycoSil Max treated concrete, plasters and cementitious surfaces.
► All products are priced at Udaipur Ex. Godown.
► Loading, unloading and shipping charges will extras. Detailed Shipping Policy
► Returns accepted only in case of incorrect product.
► Video recording at the time of unpacking the parcel will be required.
► In case of incorrect product, return will be accepted in only 2 days after the delivery date.
► Return at the buyer’s risk/cost. Detailed Return Policy
► Order can be cancelled within 24 hours of placing the order.
► Order will be cancelled only if it is not shipped. Detailed Cancellation Policy