♦ Mentioned rates are for minimum 50 bags delivery at site within 20 kms in Udaipur City area with unloading.
♦ Full truck load of cement for projects is also available at project rates (non trade rates) depending upon requirements and off take.
PRODUCT DESCRIPTION - READY MIX CEMENT PLASTER
Weight Per Bag. - 40 kg.
Silico Ready Mix Plaster is a polymer modified premixed cement based plaster. It is convenient, easy to use, strong and binds better to its substrate. It provides an even surface on which tiling can be done faster & efficiently. Ready Mix Plaster is specially formulated using graded sand to impart compactness to the plaster. It also contains special polymers which reduces re-bonding losses, thereby increasing the productivity of the labour and has water-retaining component which reduces the curing requirement of the plaster, when compared to conventional method.
Advantages
♦ Consistent quality
♦ Easy to carry, use and apply
♦ Fixed mortar ratio
♦ Minimum rebound losses
♦ Almost no curing
♦ Reduced shrinkage cracks
♦ Time saving
♦ Durable, smooth & excellent finish
Ready Mix Plaster
♦ Ready Mix Plaster is cement based quality material composed of hydraulic binders, high quality graded sand, and special additives. It is supplied as dry powder in pre weighed bags ready to use on site, which requires only addition of clean water to produce cohesive mortar, it contains special additives to provide good adhesion and shrinkage control.
♦ Ready Mix Plaster is used for masonry, civil repair, plastering on inner and outer walls. It can be used on brick, block, stone walls as well as concrete surface.
Technical Data
Ready Mix Plaster
Typical values at 30 degree C
Appearance
Grey granular powder
Main binder
PPC (Portland Pozzolana Cement)
Aggregate
Graded sand (Till 3mm)
Application thickness
6-30 mm in single layer
Water requirement
12-13% as per weight
Setting time
2 hours
Water curing
Almost no curing
Compressive strength
> 5Mpa At 7 Days
Consumption
0.17/kg.sq.ft./mm on brick wall
0.13/kg.sq.ft./mm on AAC block wall
Method of Application
Surface Preparation
Surface should be clean, sound and free from loose material, grease, oil paint etc. Prior to Ready Mix Plaster application, soak the entire surface with clean water.
Mixing
Ready Mix Plasters with 12-13 % water by weight of material. Stir for 2-3 min, to have a consistency free of lumps.
Application
Ready Mix Plaster can be applied by normal masons just like conventional method.
Curing
In general, no curing is required for Ready Mix Plaster. However, when the ambient temperature crosses 30 degrees centigrade, it is recommended to do one curing after 24 hours in order to minimize the rapid evaporation of water from applied surface.
Packaging & Storage
40 kg. PP bags. The product should be stored in cool and dry place, and to be used within 6 months from date of manufacturing.
Safety
Use of dust mask, safety goggles and gloves are recommended.
Comparison
Points
Ready Mix Plaster
Conventional Mortar
Raw material (sand & cement)
Consistent quality
Inconsistent quality
Mixing ratio (sand & cement)
Fixed
Will always very at different times
Finish
Smooth
Rough
Wastage
Minimum wastage (3-5%)
Heavy wastage in shifting, sieving of raw material & application of plaster (15-20%)
Consumption
0.17/kg.sq.ft./mm on brick wall AND 0.13/kg.sq.ft./mm on AAC block wall
0.35/kg.sq.ft.mm
Curing
Almost no curing (only 1 curing required after 24 hours of plastering)
Extensive curing required
Cracks
Negligible shrinkage cracks
Shrinkage cracks are observed
Manpower
Less as ready to use mortar & almost no curing
Practically higher for raw material processing application & curing
Edges
Sharp edges possible
Sharp edges not possible
Space Constraint
Easy to carry in narrow streets, plastering can be done very conveniently in any circumstances/weather
Separate space needed for keeping sand & cement
Stock taking
Easy to count & reconcile as available in bags
Very difficult
Paint Finish
Quality and life of paints are enhanced
Average & inconsistent
Quality
Consistent
Irregular
Shipping Policy - READY MIX CEMENT PLASTER
► All products are priced at Udaipur Ex. Godown.
► Loading, unloading and shipping charges will extras.
► Mentioned rates are for minimum 50 bags delivery at site within 20 kms in Udaipur City area with unloading.
► Delivery within 2-3 working days from the date of your confirmed order.
► Full truck load of cement for projects is also available at project rates (non trade rates) depending upon requirements and off take.
ApnaGharBanao.in is a web initiative of M/S APNAGHAR BIZCORP PRIVATE LIMITED, a firm engaged in distributorship of various building materials such as steel, cement, pipes, light weight concrete blocks and many such products that are required for construction of your dream home and project. We provide a single stop solution for building materials under one roof and shall be continuously adding new products with time.
.jpg)
