| Weight Per Bag. 40 kg. |
| |
| UltraTech Readiplast RP is cement based, plastering mortar for application over masonry walls, RCC columns, beams and ceiling areas. It provides strong surface suitable for types of final finishing applications. |
| |
|
| Specification :- |
| Technical parameters complies with IS 1661-1972, IS 2250-1965, IS 2402-1963. |
| |
| Areas of Application :- |
| UltraTech Readiplast RP is ideal for plastering in inner and outer, walls. It can also be used effectively on brick, block, stone walls as well as concrete surfaces. Highly recommended for well-prepared walls requiring thickness of plaster up to 15 mm in single layer. |
| |
| Features and Benefits :- |
| ♦ Excellent replacement to conventional plaster. |
| ♦ Assured consistent quality. |
| ♦ Needs lesser curing than conventional plaster. |
| ♦ Reduced water absorption hence enhanced durability. |
| ♦ Provides uniform and smooth finish to walls. |
| ♦ Lesser rebound loss than conventional plaster. |
| ♦ Quality plastering since it contains no impurity. |
| ♦ Speeds work due to convenience in application. |
| ♦ Minimal wastage. |
| |
| Method of Application :- |
| |
| Surface Preparation :- |
| ♦ Prepare the surface before the application of UltraTech Readiplast RP by removing oil, bond inhibiting agents, dirt, dust and laitance. |
| ♦ Clean the surface following suitable methods like by using wire brush, water jetting, mopping etc. |
| ♦ Pre-wet the surface before the application of UltraTech Readiplast RP. |
| ♦ It is advisable to roughen the concrete surface or apply UltraTech seal & dry 5 plus as bonding agent over the concrete surface to have the required adhesion. |
| |
| Mixing :- |
| ♦ UltraTech Readiplast RP requires 16-19% potable water by weight of material. |
| ♦ Add UltraTech Readiplast RP to the measured quantity of water and mix for 2-3 minutes to ensure a consistency free of lumps. |
| ♦ Mix only the required quantity of material which can be consumed within the 1 hours pot life and do not add more water than the prescribed water ratio to the already mix UltraTech Readiplast RP. |
| |
| Application :- |
| ♦ UltraTech Readiplast RP can be applied using mortar trowels or spatula like in conventional systems required no additional mason training. |
| ♦ UltraTech Readiplast RP can be applied for thickness up to 15 mm in single layer. For thickness above 15 mm, multiple layer application is recommended. |
| |
| Technical data as per relevant IS Standard :- |
| |
.jpg)
